QA & QC Training in Kolkata

QA & QC Training in Kolkata

Quality Assurance & Quality Control Course | QA QC Engineer Training

Palium Skills offers practical QA & QC Training in Kolkata for students, engineers, supervisors, inspectors and professionals who want to develop skills in Quality Assurance, Quality Control, inspection, documentation and quality management. The QA & QC Course provides a practical understanding of quality systems, inspection procedures, quality documentation, material inspection, welding quality control, non-conformance management, testing and Non-Destructive Testing (NDT) coordination. The program is designed to help participants understand how quality requirements are planned, monitored, inspected, documented and controlled throughout manufacturing, fabrication, construction and engineering activities. The course also introduces the role of NDT methods such as Visual Testing (VT), Ultrasonic Testing (UT), Radiographic Testing (RT), Magnetic Particle Testing (MT) and Liquid Penetrant Testing (PT) within quality inspection processes. Training Mode: Classroom Location: Kolkata Course: QA & QC Training

What is QA & QC?

Quality Assurance (QA) and Quality Control (QC) are related but different functions within an organization's quality management process.

Quality Assurance

Quality Assurance focuses primarily on establishing processes and systems that help prevent quality problems. QA activities may include:
  • Quality planning
  • Quality procedures
  • Quality management systems
  • Process control
  • Document control
  • Quality audits
  • Compliance monitoring
  • Corrective and preventive actions
  • Process improvement
  • Quality objectives and standards

Quality Control

Quality Control focuses on inspection, testing, measurement and verification to determine whether products, materials, processes or completed work meet specified requirements. QC activities may include:
  • Material inspection
  • Dimensional inspection
  • Visual inspection
  • Welding inspection
  • Testing
  • NDT coordination
  • Defect identification
  • Inspection and Test Plans
  • Non-Conformance Reports
  • Inspection documentation
  • Final inspection and acceptance
A good QA/QC professional therefore needs to understand both quality systems and practical inspection activities.

QA & QC Training in Kolkata

Palium Skills provides QA & QC training in Kolkata for learners who want to build practical knowledge of quality assurance, quality control, inspection and documentation. The course is designed to provide a broad understanding of quality activities used in engineering, manufacturing, fabrication, construction and industrial environments. Participants are introduced to quality planning, inspection procedures, documentation, material control, welding quality, NDT coordination, non-conformance management and quality reporting. The course can be useful for both freshers seeking entry-level knowledge and working professionals looking to strengthen their QA/QC skills

Objectives of the QA & QC Course

The course is designed to help participants:
  • Understand the fundamentals of Quality Assurance and Quality Control.
  • Understand the difference between QA and QC.
  • Learn the basic principles of quality management.
  • Understand inspection procedures and quality requirements.
  • Learn how Inspection and Test Plans are structured.
  • Understand material inspection and traceability.
  • Develop knowledge of welding quality control.
  • Understand common welding defects.
  • Understand the role of NDT in quality inspection.
  • Learn about common NDT methods and their applications.
  • Understand inspection documentation.
  • Learn about Non-Conformance Reports (NCR).
  • Understand corrective and preventive actions.
  • Develop knowledge of root-cause analysis.
  • Understand quality audits.
  • Learn how inspection results are recorded and reported.
  • Understand the importance of applicable codes, standards and specifications.
  • Develop practical knowledge relevant to QA/QC roles.
 

QA/QC and NDT: How Are They Connected?

QA/QC and NDT are closely connected in many engineering and industrial inspection environments. QA/QC establishes and controls the quality process, while NDT provides inspection and testing information that can be used to evaluate material, weld and component integrity. For example: QA/QC Planning ↓ Inspection & Test Plan ↓ Material / Welding Inspection ↓ NDT Requirement ↓ VT / PT / MT / UT / RT ↓ NDT Report ↓ QA/QC Review ↓ Acceptance / NCR / Corrective Action This makes NDT knowledge valuable for QA/QC professionals, while specialist NDT qualifications remain a separate professional pathway.

Who Should Attend QA & QC Training?

The course can be useful for:
  • QA/QC engineers
  • Quality control inspectors
  • Quality assurance professionals
  • Mechanical engineers
  • Civil engineers
  • Diploma engineers
  • Production engineers
  • Fabrication professionals
  • Welding professionals
  • Inspection engineers
  • Project engineers
  • Manufacturing professionals
  • Construction professionals
  • NDT professionals seeking broader QA/QC knowledge
  • Engineering students
  • Freshers interested in quality careers
  • Professionals moving into QA/QC roles

Eligibility for QA & QC Course

The course is intended for learners with a suitable technical, engineering or science background. Suitable candidates may include graduates, diploma holders, engineering students and professionals working in manufacturing, fabrication, construction, inspection, welding or related technical fields. For specific eligibility requirements, contact Palium Skills before enrolment.

Career Opportunities After QA & QC Training

QA & QC knowledge can be relevant to a range of technical and industrial roles. Potential job titles include:
  • QA Engineer
  • QC Engineer
  • QA/QC Engineer
  • Quality Inspector
  • QC Inspector
  • Quality Control Engineer
  • Quality Assurance Engineer
  • Inspection Engineer
  • Welding QC Inspector
  • Quality Supervisor
  • Inspection Coordinator
  • Project Quality Engineer
  • Vendor Inspection Coordinator
Actual job titles, responsibilities and certification requirements vary by employer, industry and project.

Industries Where QA & QC Skills Are Used

QA/QC professionals can work across industries such as:
  • Manufacturing
  • Engineering
  • Construction
  • Fabrication
  • Oil and gas
  • Petrochemical
  • Power
  • Infrastructure
  • Pipelines
  • Pressure equipment
  • Automotive
  • Heavy engineering
  • Shipbuilding
  • Industrial equipment
  • Welding and fabrication
NDT can be particularly relevant in industries where components, welds or materials require non-destructive inspection.

Why Learn QA & QC?

Professional QA/QC training can help participants understand how quality is planned, inspected, documented and controlled. Key benefits include:
  • Understanding QA and QC responsibilities
  • Developing inspection knowledge
  • Understanding quality documentation
  • Learning ITP concepts
  • Understanding welding quality
  • Developing NDT awareness
  • Learning NCR preparation
  • Understanding corrective actions
  • Developing inspection reporting skills
  • Understanding material traceability
  • Learning quality audit fundamentals
  • Improving readiness for QA/QC roles

QA & QC Training in Kolkata at Palium Skills

Palium Skills provides career-oriented technical training in Kolkata for students and working professionals. Our QA & QC training is designed to provide a structured understanding of:
  • Quality Assurance
  • Quality Control
  • Inspection
  • Quality documentation
  • Welding quality
  • Material inspection
  • NDT awareness
  • NDT coordination
  • NCR management
  • Root-cause analysis
  • Corrective action
  • Quality audits
  • Final inspection
The course provides a broader QA/QC foundation while introducing participants to NDT methods used within inspection and quality-control processes.

QA & QC Course Details

Course Information Details
Course Name QA & QC Training
Course Type Quality Assurance & Quality Control
Training Mode Classroom / Live Online*
Location Kolkata
NDT Coverage NDT awareness and QA/QC coordination
Practical Training As applicable to the batch
Certificate Palium Skills Course Certificate
Eligibility Technical / Engineering / Science background
Batch Schedule Contact Palium Skills for current schedule
Enrolment Contact Palium Skills
*Confirm the current training mode, duration, practical facilities, schedule and other course details with Palium Skills before enrolment.

Certificate

Participants who successfully complete the QA & QC course and meet the applicable attendance requirements receive a Palium Skills course completion certificate. The Palium Skills course certificate should not be represented as an ISO, ASNT, API, CSWIP or other third-party professional certification unless a separate authorized certification arrangement is specifically provided.

QA & QC Training Centres in Kolkata

South Kolkata Centre

Sheeba Bhavan, Poddar Nagar Near South City Mall Kolkata – 700068

Salt Lake Centre

RDB Boulevard Salt Lake Electronics Complex Kolkata – 700091 Phone: +91-8420594969 WhatsApp: +91-9903130500 Email: info@paliumskills.com

Enrol for QA & QC Training in Kolkata

Looking for QA & QC Training in Kolkata? Palium Skills' QA & QC course provides a practical foundation in Quality Assurance, Quality Control, inspection, documentation, welding quality, NDT awareness and quality management processes. Whether you are a fresher, engineering graduate, diploma holder, inspector, production professional or working QA/QC professional, the course can help you develop broader knowledge of industrial quality processes. Contact Palium Skills for the latest batch schedule, course duration, training mode, fee and enrolment information. Phone: +91-8420594969 WhatsApp: +91-9903130500 Email: info@paliumskills.com

QA & QC Course Syllabus

Module 1: Introduction to Quality Assurance and Quality Control

  • Meaning of quality
  • Quality assurance
  • Quality control
  • Difference between QA and QC
  • Quality objectives
  • Quality planning
  • Quality control processes
  • Quality inspection
  • Quality improvement
  • Role of QA/QC professionals
  • Responsibilities of QA/QC engineers and inspectors

Module 2: Quality Management Systems

Participants are introduced to the basic concepts of quality management systems. Topics include:
  • Quality management principles
  • Quality policies
  • Quality objectives
  • Quality procedures
  • Work instructions
  • Process control
  • Document control
  • Record control
  • Quality manuals
  • Internal quality audits
  • Corrective action
  • Preventive action
  • Continual improvement
Where applicable, the course introduces the role of ISO 9001-based quality management principles in organizational quality systems.

Module 3: Quality Planning and Inspection

Quality planning is an important part of QA/QC activities. Topics include:
  • Quality plans
  • Inspection procedures
  • Inspection and Test Plans (ITP)
  • Inspection checkpoints
  • Hold points
  • Witness points
  • Review points
  • Inspection stages
  • Acceptance criteria
  • Inspection records
  • Quality documentation
  • Client and third-party inspection coordination

Module 4: Material Inspection and Traceability

Quality control begins with verifying that the correct materials are received and used. Topics include:
  • Material identification
  • Material certificates
  • Material Test Certificates (MTC)
  • Heat numbers
  • Material traceability
  • Incoming material inspection
  • Dimensional inspection
  • Material storage
  • Material handling
  • Identification and marking
  • Traceability documentation
  • Material rejection and acceptance

Module 5: Welding Quality Control

Welding quality is an important part of QA/QC in fabrication, engineering and industrial projects. Topics include:
  • Basic welding processes
  • Welding terminology
  • Welding documentation
  • Welding Procedure Specification (WPS)
  • Procedure Qualification Record (PQR)
  • Welder Performance Qualification
  • Welding parameters
  • Welding consumables
  • Preheating
  • Interpass temperature
  • Post-weld considerations
  • Welding inspection
  • Weld visual inspection
  • Dimensional inspection
  • Weld defects and discontinuities
  • Acceptance criteria
  • Welding inspection documentation

Module 6: Welding Defects and Inspection

Participants learn about common welding defects and their possible causes. Topics include:
  • Porosity
  • Slag inclusion
  • Lack of fusion
  • Lack of penetration
  • Cracks
  • Undercut
  • Overlap
  • Excess reinforcement
  • Burn-through
  • Incomplete filling
  • Surface defects
  • Dimensional problems
The course also introduces the importance of determining whether an indication is acceptable according to the applicable code, specification, procedure or acceptance criteria.

Module 7: NDT in QA & QC

Non-Destructive Testing (NDT) is an important part of inspection and quality control in many engineering and fabrication environments. QA/QC professionals may need to understand when NDT is required, what each method is designed to detect and how NDT results are incorporated into inspection documentation. The course provides an overview of:

Visual Testing (VT)

Visual Testing is used to examine surfaces and components for visible defects, dimensional issues and other indications.

Liquid Penetrant Testing (PT)

Penetrant Testing can be used to detect surface-breaking discontinuities in suitable non-porous materials.

Magnetic Particle Testing (MT)

Magnetic Particle Testing is used to identify certain surface and near-surface discontinuities in suitable ferromagnetic materials.

Ultrasonic Testing (UT)

Ultrasonic Testing uses high-frequency sound waves to examine materials and can be used to detect and evaluate internal discontinuities in suitable applications.

Radiographic Testing (RT)

Radiographic Testing uses X-rays or gamma radiation to produce images that can help reveal internal discontinuities.

Radiographic Film Interpretation (RTFI)

Radiographic interpretation involves examining radiographic images and evaluating indications according to applicable requirements. Important: This QA/QC course provides an overview of NDT methods and their role in inspection. It should not be represented as a substitute for specialist Level II NDT training or certification in individual methods. Participants who want specialist NDT skills can pursue separate training in VT, PT, MT, UT, RT or Radiographic Interpretation.

Module 8: NDT Coordination for QA/QC Professionals

QA/QC professionals may coordinate with qualified NDT personnel or external inspection agencies. Topics include:
  • Selecting the appropriate NDT method
  • Understanding the purpose of NDT
  • Reviewing NDT requests
  • NDT inspection planning
  • Coordination with NDT technicians
  • Understanding NDT reports
  • Reviewing inspection results
  • Acceptance criteria
  • NDT documentation
  • Traceability of NDT reports
  • Client and third-party inspection coordination
The course focuses on understanding and coordinating NDT from a QA/QC perspective rather than qualifying participants as specialist NDT technicians.

Module 9: Inspection and Testing Documentation

Quality documentation provides evidence that inspection and testing activities have been completed according to requirements. Topics include:
  • Inspection reports
  • Test reports
  • Material certificates
  • Calibration records
  • NDT reports
  • Welding documentation
  • Inspection checklists
  • Inspection requests
  • Quality records
  • Document numbering
  • Traceability
  • Document review
  • Document control

Module 10: Non-Conformance Reports (NCR)

Participants learn the fundamentals of identifying and documenting non-conformities. Topics include:
  • What is a non-conformance?
  • Identifying quality deviations
  • NCR preparation
  • NCR classification
  • Immediate correction
  • Corrective action
  • Root-cause analysis
  • Preventive action
  • Verification of corrective action
  • NCR closure
  • Maintaining NCR records

Module 11: Root Cause Analysis and Corrective Action

Quality professionals need to understand not only how to identify a problem but also how to determine why it occurred. Topics include:
  • Problem identification
  • Root cause analysis
  • 5 Why analysis
  • Cause-and-effect analysis
  • Corrective action
  • Preventive action
  • Effectiveness verification
  • Continual improvement

Module 12: Quality Audits

The course introduces participants to the fundamentals of quality auditing. Topics include:
  • Purpose of quality audits
  • Internal audits
  • External audits
  • Audit planning
  • Audit checklists
  • Audit evidence
  • Audit findings
  • Non-conformities
  • Corrective actions
  • Audit reports
  • Follow-up and closure

Module 13: Calibration and Measuring Equipment

Accurate measurement is an important part of quality control. Topics include:
  • Measuring instruments
  • Calibration
  • Calibration certificates
  • Calibration status
  • Equipment identification
  • Measurement traceability
  • Calibration intervals
  • Handling out-of-calibration equipment
  • Inspection equipment records

Module 14: Final Inspection and Quality Release

The final inspection stage verifies whether the completed product or work meets specified requirements. Topics include:
  • Final inspection
  • Final dimensional checks
  • Visual inspection
  • Review of NDT reports
  • Review of material documentation
  • Review of welding records
  • Inspection records
  • Punch points
  • Outstanding work
  • Final quality documentation
  • Quality release

Practical QA & QC Training

The QA & QC course is designed to connect theoretical quality concepts with practical inspection and documentation activities. Practical exercises may include:
  • Reviewing sample quality documents
  • Preparing inspection checklists
  • Understanding Inspection and Test Plans
  • Reviewing material certificates
  • Identifying welding defects
  • Understanding welding inspection records
  • Reviewing sample NDT reports
  • Understanding radiographic interpretation reports
  • Preparing sample NCRs
  • Performing basic root-cause analysis exercises
  • Reviewing calibration records
  • Preparing inspection documentation
  • Understanding quality audit findings
Practical exercises may vary according to the batch, course schedule and available training resources.

    Course Details

    Course Information Details
    Course Name Radiographic Interpretation (RTFI) Training
    Course Type NDT / Technical Training
    Training Mode Regular Classroom
    Location Kolkata
    Course Fee ₹8,000
    Practical Training Included
    Certificate Palium Skills Course Certificate
    Eligibility Science stream at 10+2 level
    Attendance Requirement Minimum 90% attendance
    Batch Schedule Contact Palium Skills for current schedule
    Enrolment Contact Palium Skills
    Course schedule, availability and other commercial details may be subject to change. Confirm the current batch information with Palium Skills before enrolment.

    Certificate

    Participants who successfully complete the course and meet the attendance requirement receive a Palium Skills course completion certificate. A Palium Skills course certificate should not be represented as an external NDT Level I or Level II certification unless a separate examination and certification arrangement is specifically offered and stated by the relevant certification body.  

    Contact Palium Skills

    South Kolkata Centre 1st Floor, Sheeba Bhavan, 1/22 Poddar Nagar Near South City Mall, Kolkata – 700068 Salt Lake Centre 5th Floor, RDB Boulevard Block GP, Salt Lake Electronics Complex – Sector V Kolkata – 700091 Phone: +91-8420594969 WhatsApp: +91-9903130500 Email: info@paliumskills.com Contact Palium Skills today for the latest Radiographic Interpretation training schedule and enrolment information.

    Related NDT and Technical Courses

    Explore other technical and NDT-related training programs available through Palium Skills.
Course NameDelivery ModeFeeSpecial Offer
QA & QC TrainingLive Online / Classroom₹9,500Duration: 3 days

Frequently Asked Questions About QA & QC Training What is QA & QC? QA stands for Quality Assurance and QC stands for Quality Control. QA focuses on quality systems and processes, while QC focuses more directly on inspection, testing, measurement and verification. What is the difference between QA and QC? Quality Assurance focuses on preventing quality problems through processes and systems. Quality Control focuses on identifying and controlling quality issues through inspection and testing. What is taught in a QA & QC course? The course can cover quality management, inspection planning, ITP, material inspection, welding quality, documentation, NCRs, corrective actions, audits, calibration and NDT coordination. Is NDT included in QA & QC training? Yes. The course includes an overview of NDT methods and explains their role in quality inspection and QA/QC processes. Which NDT methods are covered? The course introduces Visual Testing (VT), Liquid Penetrant Testing (PT), Magnetic Particle Testing (MT), Ultrasonic Testing (UT) and Radiographic Testing (RT), along with the role of radiographic interpretation. Is this course the same as NDT Level II training? No. QA & QC training provides an overview of NDT and its role in quality control. Specialist NDT Level II training is a separate qualification pathway for individual NDT methods. Is welding inspection part of QA/QC? Yes. Welding inspection is an important part of QA/QC in many fabrication and engineering environments. The course introduces welding quality, welding documentation, weld defects and inspection requirements. Does the course cover WPS and PQR? The course introduces WPS, PQR and welder qualification concepts as part of welding quality control. The depth of practical code-based WPS/PQR training depends on the course schedule. What is an ITP? ITP stands for Inspection and Test Plan. It identifies inspection and testing activities, checkpoints, responsibilities and acceptance requirements associated with a project or process. What is an NCR? NCR stands for Non-Conformance Report. It is used to document a product, material, process or activity that does not meet specified requirements. Does the course include practical training? Practical exercises may include inspection documentation, sample quality records, material certificates, welding inspection examples, NCR preparation and NDT report review, depending on the batch. Who can join QA & QC training? Engineering graduates, diploma holders, technical professionals, inspectors, production professionals, welding professionals and others with a suitable technical or science background can consider the course. Is QA/QC a good career option? QA/QC skills are relevant across manufacturing, construction, fabrication, engineering, oil and gas, power and other industries. Career opportunities depend on qualifications, experience, industry requirements and additional certifications. Can NDT professionals join a QA & QC course? Yes. NDT professionals can benefit from QA/QC training because it can provide broader knowledge of inspection planning, quality documentation, NCRs, audits and quality systems. Does QA/QC training provide NDT certification? No. An overview of NDT within a QA/QC course does not itself qualify a participant as an NDT Level II technician. Specialist NDT training and certification requirements should be pursued separately where required. Where is QA & QC training available in Kolkata? Palium Skills provides technical and professional training through its Kolkata training centres, subject to current batch availability.

Related Courses

Course Categories

Training Calendar
Whatsapp Logo